Monday, September 16, 2019

How to connect manually an HP Deskjet 3630 Printer to WiFi?

HP Deskjet 3630 Printer to WiFi

1. Make sure your printer is installed on your computer.

In most cases, all you need to do is connect the printer to your computer via USB cable and allow it to install its software, though many printers also come with installation CDs.

2. Turn on your printer.


Make sure your printer is connected to a power source, then press the Power button.

3. Activate the touch screen if necessary.


Some printers need to have their touch screens folded out or turned on separately of the printer itself.


  • If your printer doesn't have a touch screen, you will need to connect the printer to your wireless network using the software setup process. If your printer is already installed, you may need to uninstall the printer and then reinstall it in order to connect it to the wireless network.


4. Select Setup button


This option's location and appearance will vary depending on your printer, but it most often characterized by a wrench and/or a gear.


  • You may have to scroll down or to the right in order to find the Setup option.
  • You may have the option to select Wireless as well. If so, tap Wireless instead.


5. Select Wireless Network Wizard


This will prompt the printer to begin searching for wireless networks.

  • You may select Wireless Setup Wizard here instead.


6. Select your network name


This should be the name that you assigned to your wireless network when you created it.


  • If you didn't set a network name when you set up your wireless network, you'll likely see a combination of your router's model number and manufacturer name instead.
  • If you don't see your network's name, scroll down to the bottom of the page, select the field there, and enter your network's name.


7. Enter your network's password.


This is the password that you use to log onto your wireless network.


  • If your router has a WPS button on it, you can instead press and hold this button for three seconds.


8. Select Done


This will save your credentials. The printer will begin attempting to connect to the network.


  • You should now be able to print over your wireless network
For more info visit our website Printwithus